The following documents are available in Adobe Acrobat PDF format unless otherwise specified. The Adobe Acrobat Reader software is a free download from www.adobe.com and is required to view the files.

Mail completed application(s) and applicable payment to:

SCCA Technical Services
6620 SE Dwight Street
Topeka, KS 66619

View All of the Homologation Forms Here

Club Racing Homologation Forms/Process

Section 9.2.2 of the GCR requires homologation for all Formula cars and Sports Racers that do not meet the rules listed in section 9.4.5. The exceptions to this include the SRF, Shelby Can-Am, FE, and SRSCCA, which have their own logbook. The original or a copy of the homologation certificate must be accompanied by the vehicle logbook to each event.

Cars with roll over structures that do not meet section 9.4.5 or cars with carbon chassis’ must complete the homologation packet and submit it to the National Office, along with the FIA paperwork and/or Registered engineering paperwork that states the car meets section 9.4.5.F of the GCR. If the make and model of chassis has been previously homologated, the FIA and engineering paperwork may not be necessary.

Please click the link above to download the Homologation paperwork.

- The homologation fee is $100 per chassis.

- Duplicate certificates are $200 each.

- A special handling fee will be charged for any special attention over and above the normal processing time. Special handling is a twenty-four hour turn around process for previously approved designs only.

- In cases where a mailed certificate will not be received in sufficient time for an event, a two-race letter can be issued. These letters are issued by the SCCA Technical Services Department and used in lieu of a homologation certificate for a maximum of two events. Two-race letters are only offered for previously approved cars and the normal homologation fees apply.

Converted Cars

If your car has been homologated but you decide to change classes, your car will need to be re-homologated for that class.

- Please send your original homologation certificate to the SCCA Technical Services National Office along with pictures of the car showing the bodywork and a description of any and all changes. We will then review your original forms to verify compliance with the new class.

- In some cases, you may be required to complete the homologation request forms as outlined in the new design section.

- The charge for a conversion is $50 per chassis.

Dual Homologation

If you would like to be able to switch between two classes with your car, a dual homologation certificate can be issued when appropriate. 

- Similar to a converted car, you will need to first send the original homologation certificate to the SCCA Technical Services National Office along with pictures showing both configurations, and a description of the changes. We will then review your original forms to verify compliance with the rules for both classes.

- In some cases, you may be required to complete the homologation request forms as outlined in the new design section.

- The fee for a dual homologation certificate is $100 per class.

Duplicate Certificates

If your homologation certificate is lost, you will need to apply for a replacement.

- To apply for a duplicate certificate, call SCCA Technical Services at 1-800- 770-2055.

- The SCCA Technical Services Staff will ask for your chassis make, model, and chassis number, as well as any previously known owners of the car.

- Please note that the SCCA Technical Services National Office does not have records of logbook numbers, those that are stamped on the rollcage.

- From the information provided, the staff will find the original certificate and issue a duplicate. The typical turn around time for a duplicate request is two weeks.

- The fee for a replacement certificate is $200.

- All SRF, FE, and SRSCCA cars in need of replacement or duplicate logbook need to contact SCCA Enterprises at (303) 693-2111.